Software History; How To Save Software History; How To Configure The Software Communications Record - Furuno VR-7000 Instruction Manual

6. OTHER FUNCTIONS
6.4

Software History

This section shows you to save and configure software history (communications
record).
6.4.1

How to save software history

Note: If error occurs while saving the software history, restart the VDR Maintenance
Viewer.
1. Click the [Maintenance] menu.
2. Select [Software History Management] followed by [Software History Collect] to
show the [Software History Collect] dialog box.
3. Click the [Select] button to show the [Open] dialog box.
4. Select where to save the data then click the [Open] button.
5. Select desired save condition then click the [OK] button.
[None]: No saving.
[At Once]: Save the software history manually. Saving begins as soon as the [OK]
button is clicked.
[Periodic]: For debugging. Do not use otherwise. The intervals are 30 sec., 60
sec., and 120 sec.
[Alert Detection]: For debugging. Do not use otherwise. Software history is
saved when the specified alert is released. Enter alert number.
6.4.2

How to configure the software communications record

This function is for debugging. Do not do this procedure unless required. Malfunction
can result.
1. Click the [Maintenance] menu.
2. Select [Software History Config].
3. Set the following:
[Process]: Select the type of communi-
cations record to save. [ALL] saves all
communications records.
[Detail]: Show or hide detailed informa-
tion.
4. Click the [Send] button.
6-4
Alert Detection