Furuno VR-7000 Instruction Manual page 40

2. SOFTWARE CONFIGURATION
Description of the items in the Setting window
[VDR Type] : Enter type of VDR.
[DRU Connection] : Unchecked stops recording to DRU; stops writing to the alert/er-
ror log.
[Junction Box Count] : Number of junction boxes connected.
[Long Term Device Count] : Enter total number of long term devices in the system.
[Sensor Adapter Count] : Enter the total number of sensor adapters in the system.
[Video LAN Converter Count] : Enter the total number of video LAN converters in the
system.
[Fixed DRU Capacity] : Display the capacity of fixed DRU.
[Float DRU Capacity] : Display the capacity of float-free DRU.
[Long Term Device Capacity] : Display the capacity of Long Term Device.
[VDR Config Version] : VDR setting version.
[VDR Config Date] : Date of VDR configuration.
[VDR Config Code] : Display VDR configuration code.
[Installation Engineer] : Name of the installer.
[Installation Company] : Name of the company that installed the system.
[Installation Date] : Date of the installation.
[MIC Test Time] : Enter the date of the MIC test.
[Note]: Enter remarks. (Entry optional.)
[Fixed DRU Recover Wait Time] : The number of seconds (60-600) to wait before
turning the power to the fixed DRU on or off after a reset, when abnormal writing is
encountered. Attempt to recover is abandoned if not successful within 10 minutes.
[Float DRU Recover Wait Time] : Same process as [Fixed DRU Recover Wait Time] .
[Long Term Device Recover Wait Time] : Same process as [Fixed DRU Recover Wait
Time] .
[Live Player Connection Count] : Number of times the Live Player has been connect-
ed.
[Alert Sentence Output Enable] : Check to output the alert sentence.
[Long Term Device Error Auto Restart Function] : Check to automatically restart the
system when long term device error is detected.
[Live Player Max Connection Count] : Enter the maximum number of times to permit
connection of the Live Player.
2-24