How To Back Up Configuration Data To A Pc - Furuno VR-7000 Instruction Manual

3. HOW TO BACK UP CONFIGURATION DATA
6. Click the [Write] button.
7. The message "VDR will be rebooted. Continue?" appears click the [OK] button to
continue. You are then logged out of the Maintenance Viewer. The reboot takes
several minutes.
8. Check that the PC, VDR, DRU (Fixed, Float), Long Term Device and CF share the
same VDR config code.
3.2

How to Back up Configuration Data to a PC

Configuration data saved to the PC can be edited with WordPad and shared with other
vessels. For future service ease, it is recommended to backup configuration data to
the PC and have the data on board the vessel. Also, it is recommended to upload this
data to the FURUNO SMS (Service Management System). If data cannot be uploaded
to the FURUNO SMS, contact the FURUNO Service Center.
How to back up configuration data to a PC
1. Set up parameters on the tabs, referring to Chapter 2.
2. Click the [Maintenance] menu.
3. Select [VDR Config Management].
4. Click the [Export to] button.
5. A confirmation window appears; click the [OK] button.
6. Select where to save the data, enter file name, then click the [Open] button.
7. Confirm that the backup file is in the location selected.
3-2