Vlc - Furuno VR-7000 Instruction Manual

2.21

VLC

The [VLC] tab sets up the Video LAN Converter.
Description of the items in the Information window
[No.]: VLC no.
[SFID]: Input SFID (System Function ID); for example, II0001.
[Status]: Status of device, [Active], [Fail], or [None].
[Check]: Results of check, [OK], [NG] (No Good), or [Not Comp] (Not Checked)
Description of the items in the Setting window
[Set] button: Reflect settings to server.
[Check] button: Check device.
[Active]: Check to make device active.
[No.]: VLC no.
[System Function ID]: Set SFID (System Function ID) of VLC. (Do not set multiple
SFIDs.)
[IP Address]: Show IP address of VLC.
[Subnet Mask]: Show the Subnet Mask of VLC.
[Delay Offset]: No use.
[CH1 Active]: Check to make channel 1 active.
[CH1 Input Port]: Select CH1 input port type, [DVI], or [RGB].
[CH1 Equip Information]: Set CH1 radar type (X-band, S-band, etc.).
[CH1 Horizontal Offset]: Enter horizontal offset for CH1.
[CH1 Vertical Offset]: Enter vertical offset for CH1.
[CH1 Phase]: Set CH1 phase.
[CH2 Active], [CH2 Input Port], [CH2 Equip Information], [CH2 Horizontal Offset], [CH2
Vertical Offset], [CH2 Phase]: Same content as corresponding CH1 items.
[Note]: Enter remarks. (Entry optional.)
2. SOFTWARE CONFIGURATION
2-33