Alarming Signal; Alarming Signal Setting - Samwon Tech Temp 2000 M Instruction Manual

SAMWONTECH

17. Alarming signal

17.1 Alarming signal setting

17.1.1 Alarming signal set the 1
▶ This is the screen for setting alarming signal.
①
① Alarming operation is set.
☞ Run : Alarming operation is only carried out during run.
☞ Always : Alarming operation is always carried out irrespective of Run/Stop
② It leads to the next or previous screen.
Table 17-1. Alarming signal set setting the 1
Parameter
Alarming operation
2nd Edition of TEMP2000M_Series IM : April. 8. 2014
st
screen
[Fig. 17-1] Alarming signal set the 1
st
screen parameter
Setting range
Run, Always
②
st
screen
Unit Initial data
ABS Always
Page 125 / 176