Samwon Tech Temp 2000 M Instruction Manual page 3

SAMWONTECH
6.1 Pattern graph display ·····················································································
6.2 Measured data (PV) graph view·········································································
6.3 Setting the measure data (PV) graph saving ·························································
6.4 SD memory storage setting ·············································································
7. Screen display setting
7.1 Screen display setting·····················································································
7.2 DI error occurrence history view········································································
7.3 Heater short state··························································································
8. Time setting
·····································································································
9. Communication error
System setting
10. System setting
10.1 Main screen ································································································
10.2 System parameter setting procedure
11. Sensor input
11.1 Sensor input setting ······················································································
11.2 Sectional input calibration setting ·····································································
12. Control & Transmitting output
12.1 Control output setting ····················································································
12.2 Transmission output setting·············································································
13. DO relay output
13.1 Relay No. and parameter setting ·····································································
13.2 Other signal relay setting
13.3 UP, SOAK, DOWN signal operation ····································································
14. Communication
14.1 Communication environment setting (RS232C / RS485)···········································
14.2 Communication environment setting (Ethernet)······················································
15. Inner signal
15.1 Inner signal setting························································································
15.2 Inner signal operation ····················································································
16. ON/OFF signal
16.1 ON/OFF signal setting ·················································································
2nd Edition of TEMP2000M_Series IM : April. 8. 2014
··························································································
·····························································
·············································································
70
72
74
76
77
79
81
82
84
85
87
88
94
96
103
105
111
115
116
118
119
121
122
Page 2 / 3