Accessories - Elcometer 456 Operating Instructions Manual

13 ACCESSORIES

The Elcometer 456
required to get started and take measurements.
Many of the following accessories are optional.
However, some are consumable items that may need to
be replaced over the lifetime of the gauge.
All these accessories are available from Elcometer, or
your local Elcometer supplier. At time of ordering please
quote the sales part number which follows the
description of each accessory.
13.1 Consumable items
Alkaline LR03 (AAA) Battery
(2 required):
13.2 Probes
Full details of the extensive range of 456 probes can be
obtained from Elcometer, your local Elcometer supplier
or the Elcometer website, www.elcometer.com.
13.3 Foil sets
2.2 mm (85 mils) 8 pieces:
1.3 mm (51 mils) 3 pieces:
5.5 mm (220 mils) 4 pieces:
15 mm (595 mils) 4 pieces:
Individual foils in the range 12.5 µm to 20 mm (0.5 mil to
790 mils) and customised sets chosen from this range
are also available. Consult your local Elcometer supplier.
13.4 Calibration certificates for foils
Certificates traceable to National Standards including
UKAS and NIST are available on request.
13.5 Test certificates
A certificate with results of a standard test on known foil
values over the full range of the probe. Order using sales
part number TEST-456.
2
is complete with all the items
T9999329-
T9904199F
T9904199G
T9904199J
T9904199K
43