Where Do I Go From Here; Technical Support - Rabbit RCM3000 User Manual

2.4 Where Do I Go From Here?

We recommend that you proceed to the next chapter and install Dynamic C (if you do not
already have it installed), then run the
RCM3000 module and the Prototyping Board are set up and functioning correctly.
If everything appears to be working, we recommend the following sequence of action:
1. Run all of the sample programs described in Chapter 3 to get a basic familiarity with
Dynamic C and the RCM3000 module's capabilities.
2. For further development, refer to the RabbitCore RCM3000 User's Manual for details
of the module's hardware and software components.
3. For advanced development topics, refer to the Dynamic C User's Manual and the
Dynamic C TCP/IP User's Manual, also in the online documentation set.

2.4.1 Technical Support

NOTE: If you purchased your RCM3000 through a distributor or through a Rabbit Semi-
If there are any problems at this point:
• Use the Dynamic C
• Check the Rabbit Semiconductor Technical Bulletin Board at
www.rabbit.com/support/bb/.
• Use the Technical Support e-mail form at www.rabbit.com/support/.
10
Downloaded from Elcodis.com electronic components distributor
conductor partner, contact the distributor or partner first for technical support.
menu to get further assistance with Dynamic C.
Help
sample program to verify that the
PONG.C
RabbitCore RCM3000