Where Do I Go From Here; Technical Support - Rabbit RabbitCore RCM2300 Getting Started Manual

C-programmable module

Hide thumbs Also See for RabbitCore RCM2300:

Table of Contents

Distributor of Digi International: Excellent Integrated System Limited

Datasheet of 101-0453 - MODULE RABBITCORE RCM2300

2.4 Where Do I Go From Here?

We recommend that you proceed to the next chapter and install Dynamic C (if you do not

already have it installed), then run the first sample program to verify that the RCM2300

and the Prototyping Board are set up and functioning correctly.

If everything appears to be working, we recommend the following sequence of action:

1. Run all of the sample programs described in Section 3.5 to get a basic familiarity with

Dynamic C and the RCM2300's capabilities.

2. For further development, refer to the RabbitCore RCM2300 User's Manual for details

of the RCM2300's hardware and software components.

A documentation icon should have been installed on your workstation's desktop; click

on it to reach the documentation menu. You can create a new desktop icon that points to

in the

default.htm

docs

3. For advanced development topics, refer to the Dynamic C User's Manual, also in the

online documentation set.

NOTE: If you purchased your RCM2300 through a distributor or through a Z-World or

Rabbit Semiconductor partner, contact the distributor or Z-World partner first for tech-

nical support.

If there are any problems at this point:

• Check the Z-World/Rabbit Semiconductor Technical Bulletin Board at

www.zworld.com/support/.

• Use the Technical Support e-mail form at www.zworld.com/support/.

folder in the Dynamic C installation folder.

RabbitCore RCM2300

Table of Contents