Bezel-Mount Installation - Rabbit RCM3000 User Manual

C.6 Bezel-Mount Installation
This section describes and illustrates how to bezel-mount the LCD/keypad module. Fol-
low these steps for bezel-mount installation.
1. Cut mounting holes in the mounting panel in accordance with the recommended dimen-
2. Carefully "drop in" the LCD/keypad module with the bezel and gasket attached.
User's Manual
Downloaded from Elcodis.com electronic components distributor
sions in Figure C-8, then use the bezel faceplate to mount the LCD/keypad module onto
the panel.
0.230
(5.8)
Figure C-8. Recommended Cutout Dimensions
0.125 D, 4x
(3)
2.870
(72.9)
3.100
(78.8)
79