Where Do I Go From Here; Technical Support - Rabbit RabbitCore RCM3209 User Manual

If Dynamic C appears to compile the BIOS successfully, but you then receive a communi-
cation error message when you compile and load a sample program, it is possible that your
PC cannot handle the higher program-loading baud rate. Try changing the maximum
download rate to a slower baud rate as follows.
• Locate the
Serial Options
Options > Project Options
to save.
If a program compiles and loads, but then loses target communication before you can
begin debugging, it is possible that your PC cannot handle the default debugging baud
rate. Try lowering the debugging baud rate as follows.
• Locate the
Serial Options
Communications
Press to force Dynamic C to recompile the BIOS. The LEDs on the USB pro-
<Ctrl-Y>
gramming cable will blink and you should receive a
message.

2.5 Where Do I Go From Here?

If the sample program ran fine, you are now ready to go on to other sample programs and to
develop your own applications. The source code for the sample programs
you to modify them for your own use. The RCM3209/RCM3229 User's Manual also
provi
des complete hardware reference information and describes the software function calls
for the RCM3209 and the RCM3229, the Prototyping Board, and the optional LCD/keypad
module.
For advanced development topics, refer to the Dynamic C User's Manual and the
Dynamic C TCP/IP User's Manual, also in the online documentation set.

2.5.1 Technical Support

NOTE: If you purchased your RCM3209/RCM3229 through a distributor or through a
Rabbit partner, contact the distributor or partner first for technical support.
If there are any problems at this point:
• Use the Dynamic C
• Check the Rabbit Technical Bulletin Board and forums at
and at www.rabbit.com/forums/.
• Use the Technical Support e-mail form at www.rabbit.com/support/.
User's Manual
dialog on the "Communications" tab in the Dynamic C
menu. Select a slower Max download baud rate. Click
dialog in the Dynamic C
menu. Choose a lower debug baud rate. Click
Help menu to get further assistance with Dynamic C.
Options > Project Options >
to save.
OK
Bios compiled successfully
is provided to allow
www.rabbit.com/support/bb/
OK
13