Chapter 2. Hardware Setup; Development Kit Contents - Rabbit RCM3000 User Manual

2.1 Development Kit Contents

The RCM3000 Development Kit contains the following items:
• RCM3010 module with Ethernet port, 256K flash memory, and 128K SRAM.
• RCM30/31/32XX Prototyping Board.
• AC adapter, 12 V DC, 1 A. (Included only with Development Kits sold for the North
• 10-pin header to DB9 programming cable with integrated level-matching circuitry.
• Dynamic C CD-ROM, with complete product documentation on disk.
• Getting Started instructions.
• A bag of accessory parts for use on the Prototyping Board.
• Rabbit 3000 Processor Easy Reference poster.
• Registration card.
User's Manual
Downloaded from Elcodis.com electronic components distributor
This chapter describes the RCM3000 hardware in more detail, and
explains how to set up and use the accompanying Prototyping Board.
NOTE: This chapter (and this manual) assume that you have the RCM3000 Development
Kit. If you purchased an RCM3000 module by itself, you will have to adapt the infor-
mation in this chapter and elsewhere to your test and development setup.
American market. A header plug leading to bare leads is provided to allow overseas
users to connect a power supply compatible with their local mains power.)
2. H
ARDWARE
S
ETUP
5