Where Do I Go From Here; Technical Support - Rabbit RabbitCore RCM3000 Getting Started Manual

C-programmable module with ethernet

Hide thumbs Also See for RabbitCore RCM3000:

Table of Contents

2.5 Where Do I Go From Here?

We recommend that you proceed to the next chapter and install Dynamic C (if you do not

already have it installed), then run the

RCM3000 module and the Prototyping Board are set up and functioning correctly.

If everything appears to be working, we recommend the following sequence of action:

1. Run all of the sample programs described in Section 3.3 to get a basic familiarity with

Dynamic C and the RCM3000 module's capabilities.

2. For further development, refer to the RabbitCore RCM3000 User's Manual for details

of the module's hardware and software components.

A documentation icon should have been installed on your workstation's desktop; click

on it to reach the documentation menu. You can create a new desktop icon that points to

in the

default.htm

3. For advanced development topics, refer to the Dynamic C User's Manual and the

Dynamic C TCP/IP User's Manual, also in the online documentation set.

NOTE: If you purchased your RCM3000 through a distributor or through a Z-World or

Rabbit Semiconductor partner, contact the distributor or partner first for technical support.

If there are any problems at this point:

• Use the Dynamic C

• Check the Z-World/Rabbit Semiconductor Technical Bulletin Board at

www.zworld.com/support/bb/.

• Use the Technical Support e-mail form at

Getting Started

PONG.C

folder in the Dynamic C installation folder.

docs

Help

menu to get further assistance with Dynamic C.

sample program to verify that the

www.zworld.com/support/questionSubmit.shtml

Table of Contents