Where Do I Go From Here; Technical Support - Rabbit RabbitCore RCM2000 Getting Started Manual

C-programmable module

Hide thumbs Also See for RabbitCore RCM2000:

Table of Contents

2.4 Where Do I Go From Here?

We recommend that you proceed to the next chapter and install Dynamic C (if you do not

already have it installed), then run the first sample program to verify that the RCM2000

and the Prototyping Board are set up and functioning correctly.

If everything appears to be working, we recommend the following sequence of action:

1. Run all of the sample programs described in Chapter 4 to get a basic familiarity with

Dynamic C and the RCM2000's capabilities.

2. For further development, refer to the RabbitCore RCM2000 User's Manual for details

of the module's hardware and software components.

A documentation icon should have been installed on your workstation's desktop; click

on it to reach the documentation menu. You can create a new desktop icon that points to

in the

default.htm

3. For advanced development topics, refer to the Dynamic C User's Manual, also in the

online documentation set.

NOTE: If you purchased your RCM2000 through a distributor or through a Z-World or

Rabbit Semiconductor partner, contact the distributor or partner first for technical support.

If there are any problems at this point:

• Check the Z-World/Rabbit Semiconductor Technical Bulletin Board at

www.zworld.com/support/bb/.

• Use the Technical Support e-mail form at www.zworld.com/support/support_submit.html.

Getting Started

folder in the Dynamic C installation folder.

docs

Table of Contents