How To Set Up Your Computer's Ip Address For Direct Connect - Rabbit RCM3000 User Manual

6.9 How to Set Up Your Computer's IP Address for Direct Connect

When your computer is connected directly to the RCM3000 board via an Ethernet connec-
tion, you need to assign an IP address to your computer. To assign the PC the address
10.10.6.101
Click on
ble-click the Network icon. Depending on which version of Windows you are using, look
for the
click on this line or select
up the TCP/IP properties dialog box. You can edit the IP address and the subnet mask
directly. (Disable "obtain an IP address automatically.") You may want to write down the
existing values in case you have to restore them later. It is not necessary to edit the gate-
way address since the gateway is not used with direct connect.
User's Manual
Downloaded from Elcodis.com electronic components distributor
with the netmask
Start > Settings > Control Panel
/
TCP/IP Protocol Network > Dial-Up Connections
Properties
IP 10.10.6.101
Netmask
255.255.255.0
Direct Connection PC to RCM3000 Board
, do the following.
255.255.255.0
to bring up the Control Panel, and then dou-
or
Local Area Connection > Properties
User's PC
Ethernet
crossover
cable
/ line or tab. Double-
Network
to bring
RCM3000
Board
45