How To Install A Thermocouple Input Unit - Panasonic FP3 Technical Manual

2. How to Install a Thermocouple Input Unit

Before installing the unit, remove the connector cover on the backplane.
1. Fit the unit tabs (two) into the unit holes
on the backplane.
3. After properly installing the unit to the backplane,
secure the mounting screw at the top.
Notes:
S Be sure to turn OFF the power of the FP3/FP10S system before installing units.
S Do not drop the unit or apply excessive force on it.
S Be sure to secure the mounting screw at the top.
S Do not allow parts or other objects to fall into the unit while making wiring connections.
S Leave the dust proofing label on the upper surface of the unit until the wiring is finished.
S Do not touch the connectors on the rear side of the unit. Static electricity may damage the thermocouple
input unit.
2. Push the unit in the direction of the arrow
and install onto the backplane.
Screwdriver
3-1. Installing a Thermocouple Input Unit
19