Installing A Thermocouple Input Unit; Basic Configurations - Panasonic FP3 Technical Manual

Programmable, thermocouple input unit

Hide thumbs Also See for FP3:

Table of Contents

3-1. Installing a Thermocouple Input Unit

J Location and restrictions

Master backplane

Slot number 0

S The thermocouple input unit can be installed on any slot position of a CPU equipped master backplane, expansion

backplanes or MEWNET-F (remote I/O) slave unit installed master backplanes.

S When building up an FP3/FP10S system, take current consumption into consideration as follows:

The internal power supply (5 V) goes

to each unit via the backplane bus.

J I/O allocation

S In the automatic I/O allocation, sixteen points of I/Os (16SX) are automatically allocated for each thermocouple

input unit when the power is supplied to the FP3/FP10S system.

S Even with the arbitrary I/O allocation, sixteen points (16SX) must be allocated for each thermocouple input unit.

Note:

S For details about the I/O allocation, refer to the "FP3/FP10S HARDWARE Technical Manual."

Expansion Backplane

(Plate number 1)

Power supply unit Rated output current (5 V)

AFP3631

AFP3636

AFP3634

Expansion Backplane

(Plate number 2)

2.4 A

6 A

2.4 A

Table of Contents

Table of Contents

Fp10s