Advertisement
The system will spend 20-30 seconds on constructing communication
g
)
link, and real link period will depend on the current wireless channel
condition. When wireless link is set up, "LINK" and "VIDEO" will light and
"RSSI" indicate current received wireless signal strength. When "Video"
light which show receiving the normal video signal, and then connected HD
monitor will display the video and audio accordingly.
h) After TX and RX both connect normally, if video output correct of
transmitter to PC, DVD and camera, then TX and RX's "video"(yellow),
"LINK"(green) and "RSSI"(Blue) light will be on; if disconnection, then then
TX and RX's "video"(yellow), "LINK"(green) and "RSSI"(Blue) light will be
off.
Note: RSSI is the strength of signal reception
i) For the best wireless transmission performance, it need install the
transmitter and receiver more than1.5m about the ground and keep the
same height, and make sure no obstacles between them; Moreover, it is the
best to keep the transmitter antennas face to face, and don't turn round any
sides with too big angle. The real transmission distance is also relevant to
current air electromagnetic environment, because the system works in ISM
band, it is exposure to all kind od 5GHz band air interference, we suggest
the users should do a manual frequency sweep.
15
Advertisement
