DESCRIPTION Thank you for purchasing Hollyland MARS 400 wireless HD video transmission system. The product uses currently newest encode, decode and 5G wireless transmission technologies. And can achieve ultra-low latency video transmission. It transmits over 400ft with a clean line of sight (LOS), supports up to 1080P 60Hz resolution, and in the end achieves Full HD HDMI video transmission.
STANDARD SETUP HDMI IN HDMI OUT T h i s w i r e l e s s H D v i d e o t r a n s m i s s i o n s y s t e m u s e s t h e l a t e s t w i r e l e s s communication technology, and transmits ultra-low latency HD video transmission.
PRODUCT INTERFACES ① ① ⑤ ④ ⑥ ⑤ ② ⑦ ⑥ ⑨ ⑧ ② ⑧ ⑦ ③ ⑨ ⑩ ⑪ ⑩ ④ ③ ⑫ ⑪ TRANSMITTER RECEIVER ① ① Antenna Interface Antenna Interface ② ② HDMI Input HDMI Output ③ ③...
INSTALLATION ① ③ ② ④ ① Install the antenna as demonstrated ② Mount and fixed the transmitter & receiver ③ Connect to a power supply ④ Turn on the device...
OLED DISPLAY ① ① ② ② ⑤ ⑤ 1AC2E49 1AC2E49 ⑥ ③ ③ ⑥ ④ ④ ⑦ ⑦ ⑧ ⑧ TRANSMITTER RECEIVER ① ① Device ID Device ID ② ② Scene Mode Scene Mode ③ ③ USB Stick Detection Display USB Stick Detection Display ④...
STATUS DESCRIPTION 1AC2E49 1AC2E49 1AC2E49 NO VIDEO When the devices are disconnected, a cross “×” will appear above the signal strength bars on both the transmitter and receiver. As shown in the above diagram, device 1 is on connected status, device 2 is on disconnected status. As shown in the above diagram, “NO VIDEO”...
Page 9
STATUS DESCRIPTION 1AC2E49 1AC2E49 The black and bold text on white background means that it is the DFS channel, while the white text on the black background is the non-DFS channel. When the device detects the USB stick connected, the USB stick detection display lights up.
Page 10
QUICK GUIDE SCENE MODE IMAGE MODE BALANCE MODE SPEED MODE SYSTEM SETTING SCENE MODE LANGUAGE SYSTEM SETTING PAIR VERSION INFO RETURN EXIT VERSION INFO B0411D8F5D2F V1.0.0.1 RETURN TRANSMITTER Long press “OK” button for about 3 seconds, entering into the root menu interface, it includes scene mode, system setting, version information options.
Page 11
QUICK GUIDE √ × √ √ √ √ √ × √ × √ √ √ RETURN SYSTEM SETTING CHANNEL SCAN LANGUAGE SYSTEM SETTING PAIR VERSION INFO RETURN EXIT VERSION INFO B2581A4F5D8G V1.0.0.1 RETURN RECEIVER Press “OK” button for about 3 seconds, entering into the root menu interface which includes channel scan, system setting, version information options.
USB stick should be at FAT32 or exFAT format. SMART TERMINAL MONITORING Android system installation and use The application name is “HollyView”. It is available on Hollyland's official website and Android APP store. No.1 Scan the device QR code, the APP will be automatically connected to the device.
Page 13
PARAMETERS Transmitter (TX) Receiver (RX) HDMI Input (Type A Female) HDMI Output 1 (Type A Female) HDMI Loop Out (Type A Female) HDMI Output 2 (Type A Female) Interface 2 Antenna Interfaces (RP-SMA Male) 2 Antenna Interfaces (RP-SMA Male) DC Input, Type-C USB; DC Input, Type-C USB;...
CONNECTION ISSUES Please check and make sure the power supplies function well of the transmitter and receiver. If the battery indication shows at its low battery, please replace the battery in time. Please try to change to another channel and connect the devices again. Please re-pair the devices.
Page 15
IMAGE LOW QUALITY ISSUES Please set “SCENE MODE” to “IMAGE MODE”. Please check HDMI (IN/OUT) cable is stably connected. Please make sure the transmitter and receiver are installed at least 1.5m above the ground. Please check the signal strength status. If it is with only 1 bar signal, it means that the signal strength is very weak.
Need help?
Do you have a question about the MARS 400 and is the answer not in the manual?
Questions and answers