Advertisement
4. Operation instruction
Getting started
After finishing all steps above, system is workable, follow below steps.
a) Ensure the video source output of the camera is OK, and the HD
monitor is power on and switched to connected video input port.
b) Ensure all input, output HDMI cables are connected.
c) Ensure all antennas are installed, and the straight line distance is
3-5m between transmitter and receiver, it is better to keep TX 5
antennas and RX 5 antennas with orthogonal angle each other for
best RF performance. Looks like below figure.
d) Ensure both the transmitter and receiver installed batteries or DC input
ports connected well, if connect to outside 12V DC power sources, please
make sure the DC power correctly connect to transmitter and receiver. Then
13
Advertisement
