Braun Infusomat Space Instructions For Use Manual page 59

Chapter 5
New Primary Infusion:
• To accept a new PRIMary order, stop infusion and clear current PRIMary infusion by
pressing
SECondary Orders:
Orders received after PRIMary has been set will be for SECondary infusions,
follow prompts on screen to stop the PRIMary to accept the SECondary order.
• Confirm order values as above for PRIMary orders.
• Respond to prompts to check bag height and clamps prior to starting SECondary.
New SECondary order while SECondary is Infusing:
• Follow display prompts to stop current infusion.
Note:
order and answering yes to "hold for later".
Note:
ing all values. Once all values are confirmed you may scroll to any value and
open editor with
request made for revised order to be sent.
Note:
on top of stand by display, press
standby).
c
key and responding "yes" to clear current infusion.
A SECondary order may be held for later by pressing
Changing values on any incoming order may only be done after confirm-
l
to change value. Alternately, order may be cancelled and
If pump is placed in standby while order is pending new order will flash
AUTOPROGRAMMING AND BARCODING
M
key to accept order (pump will come out of
c
key to cancel
59