Braun Infusomat Space Instructions For Use Manual page 5

Pole clamp
handle
Pole clamp
release button
Underside view
Clamp grids
INFUSOMAT® SPACE OVERVIEW
Attaching Pump to Pole Clamp
Line up slots on top sides of pump with
grooves of Pole Clamp and slide pump into
Pole Clamp until locking mechanism clicks.
To remove, simultaneously press release
button on frame and push handle down
while pulling pump out from pole clamp.
Locking Devices Together
A maximum of three pumps (Infusomat®
Space or Perfusor® Space) may be
inter-locked on a single pole clamp.
Caution: Avoid external mechanical
action.
Line up the grooves of the lower pump with
the slots of the upper pump and slide the
lower pump in until the lock clicks and the
green buttons are aligned with each other.
To disconnect, push green locking button of
upper pump and slide lower pump out.
The pump is now securely attached to Pole
Clamp.
• Do not position the pump unit over the
patient.
• DO NOT use any Pole Clamp that shows
signs of damage.
• DO NOT use Pole Clamp with missing
clamp grids.
5