Quick Start Guide
July 2017
5. Lower the antenna and mounting plate into the fitting location on the silo.
6. Bolt the mounting plate onto the flange of the silo.
Step 3: Rotate antenna toward silo center
1. Slightly loosen the nut that connects the antenna with the mounting plate.
2. Rotate the antenna. The notch on the top of the thread must be directed
toward the center of the silo.
3. Tighten nut.
Step 4: Install head
1. Remove the rear panel.
Hex key (4 mm)
4x
2. Remove the cable clamp.
9