Table of Contents
Advertisement
July 2017
5.0
Configuration using Rosemount 3DVision
5.1 Installing the Rosemount 3DVision software
The software is comprised of two components: a server and a client. For initial
configuration, it is recommended to install both the server and the client on the
same computer. However, it is possible to install the Rosemount 3DVision
Server and Client on separate computers and connect to them accordingly.
1. Insert the flash drive into the USB port.
2. Select Install Rosemount 3DVision and follow the on-screen instructions.
If the installation program does not start automatically, run Installer.exe
from the flash.
5.2 Starting Rosemount 3DVision
1. Double-click the Rosemount 3DVision desktop icon
After a few seconds, the Rosemount 3DVision Server Connection window
appears.
2. Select Device Configuration (default) to start configuration.
Quick Start Guide
.
23
Advertisement
Table of Contents
