Table of Contents
Advertisement
9R479-IR
Backlight in the LCD display
Display modes
meriGauge plus System User Manual
info@Meriam-Direct.com
White backlight
The white backlight has an automatic timeout. If no keys have
been pressed, the backlight automatically turns off after
1 minute.
Note: You can configure the backlight timeout with
meriLink.
Levels of backlight intensity
Press the
key to cycle through the choices:
Backlight
•
Low.
•
Medium.
•
High.
•
Off.
Flashing red backlight
•
The flashing red backlight indicates an error condition.
•
Possible error conditions are:
o Pressure has exceeded the calibrated accuracy of the
meriSense.
o Pressure has fallen below the stated accuracy of the
meriSense.
•
The red backlight overrides the white backlight.
Nine (9) display modes
Some modes below have characters in parentheses. The
characters in bold display on the meriGauge plus.
1. Normal
2. Min (MIN)
3. Max (MAX)
+/–
4. Accuracy (
)
5. Tare (T.OFF, T.ON)
6. Average (AVG)
7. Rate of change per minute
(RATE)
8. Data Log Lite (DATA LOG)
9. Time & Temperature
April 2016
17
1.888.610.7664
Advertisement
Table of Contents
Need help?
Do you have a question about the meriGauge plus and is the answer not in the manual?