The Merigauge Plus Gauge; Batteries - Meriam meriGauge plus User Manual

9R479-IR

The meriGauge plus gauge

Batteries

meriGauge plus System User Manual
info@Meriam-Direct.com
Install the batteries
1. Turn over the meriGauge plus so the display faces down.
2. Remove the four screws on the battery cover with the
Phillips head screwdriver by turning them
counterclockwise.
3. Insert the four AA batteries.
Note: Pay attention to the positive (+) and
negative (−) battery polarity markings at the bottom
of the compartment.
4. Replace the battery cover.
5. To secure the cover, torque the screws clockwise 0.56 N-m
(5 in-lbs) maximum.
Know your batteries
The meriGauge plus is powered by four 1.5 volt AA size
batteries.
• Never mix batteries—not by manufacturer or by size, by
capacity, or by chemistry.
•
Never mix old and new batteries.
• Remove all four batteries in the meriGauge plus at the
same time.
•
Replace all four batteries with batteries from the same
package or with the same expiration date.
April 2016
14
1.888.610.7664