Intel MFSYS25 Install Manual page 10

7. Ensure the swivel lock is up (see letter "A" in the following figure). Re-install the
multi-pin adapter into the multi-pin bracket by placing the bottom mounting pin fully
in the bracket. Press and hold the top (floating) pin (see letter "B") while pushing the
adapter into the bracket. Ensure that all three mounting pins on the multi-pin adapter
are fully engaged in the multi-pin bracket. The multi-pin adapter must be fully locked
into the bracket. Use the swivel lock to lock the multi-pin adapter in place (see letter
"C").
8. Repeat the previous three steps for both ends of each rack rail.
4
A
B
Figure 3. Setting Multi-pin Adapter in Multi-pin Bracket
Rail Kit Install Guide: Intel® Modular Server System MFSYS25
C
AF002464