Table of Contents
Advertisement
Data saving (function group MEM)
– Use the right-hand rotary knob to set the number of
the data set that you want to recall.
– Select the function RECALL.
– Use the right-hand rotary knob to set it to on. The
measurement line will then prompt: Recall data set?
– Confirm by pressing the corresponding key
more time (all other keys would abort the process).
The data set is now loaded and the current setup is
overwritten. When the loading process is completed, the
function RECALL is automatically reset to off.
H Note:
The gate for surveying the echo can be moved in the
recalled A-scan. However, as the evaluation is made in
the frozen A-scan, the measurement resolution is only
0.5 % of the adjusted calibration range.
Krautkramer USM 35X
one
Issue 01, 04/2005
Operation
5-37
Advertisement
Table of Contents
