Instructions For Installers And Service Engineers Only - Triton T80si Installation And Operating Instructions Manual

INSTRUCTIONS FOR INSTALLERS AND SERVICE ENGINEERS ONLY

InSTRuCTIOnS FOR InSTALLERS AnD SERVICE EnGInEERS OnLy
CLeaNiNg The iNLeT fiLTer
The inlet filter is situated inside the solenoid inlet
(fig.).
To gain access to the filter remove the cover,
then disconnect and remove the compression
fitting. Also, depending on the incoming
pipework arrangements, if there is not enough
slack in the pipework, it could mean the removal
of the unit from the wall.
When cleaning the filter, do not use a sharp
object, as it will cause damage. It is preferable to
use an old toothbrush or similar.
T80si electric shower

Fig.
Inlet
filter