Ruijie Networks RG-S6220-48XS4QXSV1 Hardware Installation And Reference Manual page 8

Power module 1
indicator
Power module 2
indicator
RCMI port indicator
Fan module indicator
SFP+ port status
indicator
QSFP+ port status
indicator
Solid red
Blinking green.
Solid green
Solid yellow
Off
Solid yellow
PWR1
Solid red
Solid green
Off
Solid yellow
PWR2
Solid red
Solid green
Off
Green
Yellow
RCMI
Blinking
Cycling blinking
green, yellow and
red.
Solid green
Fan Solid yellow
Solid red
Off
1F-8F
(Ethernet Solid green
mode)
Blinking green.
Off
1F-8F
Solid yellow
(FC mode)
Blinking yellow
Off
9F-48F
(Ethernet Solid green
mode)
Blinking green.
Off
49F-64F
(4 x 10G Solid green
mode)
Blinking green.
1) One of the modules of the system fails.
2) The internal temperature exceeds the warning
working temperature, and the switching service
resets.
The system is initializing.
The system is working normally.
The temperature gets to the warning threshold.
The power supply module is not in the position.
The power supply temperature exceeds the normal
working temperature.
The power supply module fails or it is not connected
with the AC power cord.
The power supply module works normally.
The power supply module is not in the position.
The power supply temperature exceeds the normal
working temperature.
The power supply module fails or it is not connected
with the AC power cord.
The power supply module works normally.
The port is not linked up.
The port is linked up in 1000M mode.
The port is linked up in 10M or 1000M mode.
Data are transceiving at the port.
This status helps to locate the device position.
All fan modules are in the position and working
normally.
Only three fan modules are in the position.
1) A fan fails.
2) The number of the fan module is less than three.
The port is not linked up.
Port 10G/1G is linked up.
Port 10G/1G is transceiving data.
The port is not linked up.
Port2/4/8G is linked up.
Port2/4/8G is transceiving data.
The port is not linked up.
Port 10G/1G is linked up.
Port 10G/1G is transceiving data.
The port is not linked up.
Port 10G is linked up.
Port 10G is transceiving data.
- 5 -