Powering Off The Vsm; Connecting The Port Groups - Cisco Nexus 1000V Troubleshooting Manual

Chapter 5 Upgrade
S e n d d o c u m e n t c o m m e n t s t o n e x u s 1 k - d o c f e e d b a c k @ c i s c o . c o m .
You have completed this procedure. Return to the
Step 4
section on page

Powering Off the VSM

Use this procedure to power off the newly-created VSM.
From the vCenter Server left-hand panel, right-click the VSM and then choose Power > Power Off.
Step 1
The VSM shuts down.
You have completed this procedure. Return to the
Step 2
section on page

Connecting the Port Groups

Use this procedure to make sure the port groups to the host connect when you power on the VSM.
In vCenter Server, select the VSM and then choose Edit > Settings.
Step 1
The Virtual Machine Properties dialog box opens.
Select the Control port group and check the following Device Settings:
Step 2
•
OL-28795-01
5-13.
5-13.
Connect at Power On
"Recovering a Primary VSM with Active Secondary"
"Recovering a Primary VSM with Active Secondary"
Cisco Nexus 1000V Troubleshooting Guide, Release 4.2(1)SV2(2.1)
Problems with the GUI Upgrade
5-15