Cisco Nexus 1000V Troubleshooting Manual page 129

Chapter 9 Port Profiles
S e n d d o c u m e n t c o m m e n t s t o n e x u s 1 k - d o c f e e d b a c k @ c i s c o . c o m .
Command
show port-profile-role [name
port-profile-role-name]
show running-config port-profile
[profile-name]
show port-profile-role
show port-profile-role users
show port-profile sync-status [interface
if-name]
show port-profile virtual usage [name
profile-name]
show msp internal info
show system internal port-profile
profile-fsm
show system internal port-profile
event-history msgs
For detailed information about show command output, see the Cisco Nexus 1000V Command Reference,
Release 4.2(1)SV2(1.1).
EXAMPLES
Example 9-1
n1000v# show port-profile
port-profile vEthProfile1
description:
type: vethernet
status: disabled
capability l3control: no
pinning control-vlan: -
pinning packet-vlan: -
system vlans: none
OL-28795-01
show port-profile
Cisco Nexus 1000V Troubleshooting Guide, Release 4.2(1)SV2(2.1)
Port Profile Troubleshooting Commands
Purpose
Displays the port profile role configuration,
including role names, descriptions, assigned
users, and assigned groups.
See Example 9-7 on page
Displays the port profile configuration.
See Example 9-6 on page
Displays the port profile role configuration.
See Example 9-7 on page
Displays available users and groups.
See Example 9-8 on page
Displays interfaces that are out of sync with the
port profile.
See Example 9-9 on page
Displays the port profile usage by interface.
See Example 9-10 on page
Displays port profile mappings on vCenter server
and configured roles.
See Example 9-11 on page 9-13
Displays port profile activity on the Cisco Nexus
1000V, including transitions such as inherits and
configurations. If the following displays, then all
inherits are processed:
Curr state: [PPM_PROFILE_ST_SIDLE]
See Example 9-12 on page 9-17
Displays the messages logged about port profile
events within the Cisco Nexus 1000V.
See Example 9-13 on page 9-17
9-12.
9-12.
9-12.
9-12.
9-12.
9-13.
9-7