Generating A Log Bundle - Cisco Nexus 1000V Troubleshooting Manual

Generating a Log Bundle

S e n d d o c u m e n t c o m m e n t s t o n e x u s 1 k - d o c f e e d b a c k @ c i s c o . c o m .
•
•
•
•
Generating a Log Bundle
You can collect the diagnostic information for VMware vCenter Server by collecting vSphere log files
into a single location. Complete the following steps to generate the vSphere Web Client log bundles from
a vCenter Server:
1.
2.
Currently the login to the vCenter Plug-in is available via the administrator account only.
Note
Cisco Nexus 1000V Troubleshooting Guide, Release 4.2(1)SV2(2.1)
25-2
VMware vCenter Web Client 5.1. The vCenter Plug-in does not work with the vSphere 5.0 Web
Client.
The following browsers are supported for version 5.1 of the vSphere Web Client:
Microsoft Internet Explorer 7, 8, and 9.
–
Mozilla Firefox 3.6 and later.
–
Google Chrome 14 and later.
–
The vSphere Web Client requires the Adobe Flash Player version 11.1.0 or later to be installed.
Make sure that Cisco Nexus 1000V Release 4.2(1)SV2(1.1) is installed and configured to a vCenter.
Log in to the Windows server where the VMware vCenter Server is installed.
Click Start > All Programs > VMware > Generate vSphere Web Client Log Bundle.
You can use this step to generate the vSphere Web Client log bundles even when you are not able to
connect to the vCenter Server using the vSphere Client. The log bundle is generated as a .zip file.
See VMware documentation Collect vSphere Log Files for more information on collecting the log
files.
Chapter 25 vCenter Plug-in
OL-28795-01