License Troubleshooting Commands - Cisco Nexus 1000V Troubleshooting Manual

License Troubleshooting Commands

S e n d d o c u m e n t c o m m e n t s t o n e x u s 1 k - d o c f e e d b a c k @ c i s c o . c o m .
License Troubleshooting Commands
You can use the commands in this section to troubleshoot problems related to licenses.
Command
show module
show module vem license info
show license usage [license_name]
show interface veth
show license host-id
show license file
show license brief
svs license transfer src-vem <vem no>
license_pool
For detailed information about show command output, see the Cisco Nexus 1000V Command Reference,
Release 4.2(1)SV2(1.1).
EXAMPLES
Example 4-1
n1000v# show module
Mod
--
1
5
Mod
--
Cisco Nexus 1000V Troubleshooting Guide, Release 4.2(1)SV2(2.1)
4-4
show module
Ports Module-Type
----- -------------------------------- ------------------ ------------
0 Virtual Supervisor Module
248 Virtual Ethernet Module
Sw Hw
--------------- ------
Purpose
Displays display module information including
license status (unlicensed or active).
See Example 4-1 on page
Displays the VEM license information including
license status, license version, socket count.
See Example 4-2 on page
Displays information about licenses and where
they are used. If displayed for a specific license,
indicates VEM and socket information.
See Example 4-3 on page
See Example 4-4 on page
Displays the messages logged about port profile
events within the Cisco Nexus 1000V.
See Example 4-5 on page 4-5
Displays the serial number for your Cisco Nexus
1000V license.
See Example 4-6 on page
Displays the contents of a named license file.
See Example 4-7 on page
Displays a list of list of license files installed on
the VSM.
See Example 4-8 on page
Transfers the licenses from a VEM to the license
pool.
See Example 4-9 on page
Model Status
Nexus1000V active *
NA unlicensed
Chapter 4 Licenses
4-4.
4-5.
4-5.
4-5.
4-6.
4-6.
4-6.
4-6.
OL-28795-01