Permanent Settings In Programming Mode - Jura X8 Instructions For Use Manual

4 Permanent settings in programming mode

Programme Sub-item
item
'1/5' 'Clean',
'Descale',
'Clean the milk
'Filter'
'2/5' 'Rinse the milk
'Rinse the coffee
'Information'
'3/5' 'Expert mode'
'Customise cup fill volume'
'One-off settings'
'Lock/enable'
'4/5' 'Choose language'
'Units'
'Rinse the milk system'
'Switch off after'
'Water hardness'
'5/5' 'Product
'Day
'Maintenance
'Version'
'Connect
'Disconnect accessories'
displayed if the JURA Smart
Connect is being used.)
Press the
gate through the programme items and permanently save the
required settings using the multi-function buttons. The following
settings can be made:
system',
(only if filter is fitted)
system',
system',
counter',
counter',
counter',
accessory',
(Only
4 Permanent settings in programming mode
' Pc ' button to enter programming mode. You can navi-
Explanation
T Here you can start the required maintenance
programme or find out what maintenance actions
are required.
T Select your settings for speciality coffees and
hot water.
T Disable the function 'Permanently setting the
amount of water for the cup size'.
T Specify whether or not to allow one-off settings
during preparation.
T Enable or disable individual products.
T Select your language.
T Select the unit for the amount of water.
T Change the setting for the milk system rinsing.
T Set the time after which the X8 should switch
off automatically.
T Adjust the water hardness.
T Keep track of all products prepared and view the
number of maintenance programmes performed.
T Connect the X8 to a compatible accessory via
Bluetooth or disconnect the connection again.
21