Regular Maintenance; Switching Off The Machine - Jura X8 Instructions For Use Manual

3 Daily operation

Regular maintenance

Switching off the
machine
20
T Rinse the water tank with clean water.
T Clean the milk system in the dual spout (see Chapter 5
'Maintenance – Cleaning the milk system').
T Remove the milk pipe and rinse it thoroughly under running
water.
T Dismantle and rinse the dual spout (see Chapter 5 'Mainte-
nance – Dismantling and rinsing the dual spout').
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
You will find more information about caring for your X8 in program-
ming mode under '2/5'
Carry out the following maintenance actions regularly or as
required:
U
In the interests of hygiene, we recommend changing the milk
pipe and interchangeable milk spout on a regular basis
(approximately every 3 months). Replacements are available
from specialised dealers.
U
Clean the inside of the water tank, e.g. with a brush. Further
information about the water tank is provided in these instruc-
tions for use (see Chapter 5 'Maintenance – Descaling the
water tank').
U
Traces of milk and coffee may stick to the top and bottom of
the cup grille. If this happens, clean the cup grille.
When the X8 is switched off, the system is automatically rinsed if a
speciality coffee has been prepared. If milk has been prepared, you
will also be prompted to clean the milk system.
T Press the On/Off button Q.
E If milk has been prepared, you will be prompted to clean the
milk system ('Clean the milk system'
the milk system
cess continues automatically.
If milk has been prepared but you have not started milk sys-
tem cleaning, the milk system is rinsed first
being rinsed').
'Machine is rinsing', the system rinses itself. The operation
stops automatically. Your X8 is switched off.
/ 'Information' ('Maintenance
/
now?'). After 10 seconds the switch-off pro-
information').
'Do you want to clean
('Milk system is