Connecting Milk - Jura X8 Instructions For Use Manual

First-time use without filter
cartridge activation
CAUTION

Connecting milk

E The start screen shows the products you can prepare. Press
the ' T ' button to display more products.
E If the filter is active, this is indicated by a blue filter symbol at
the bottom of the display.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Press the 'No filter'
'Saved' appears briefly on the display.
'Fill water tank'
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the
tank.
'System is filling', the system fills up with water.
'Machine is heating'
'Machine is rinsing', the system is rinsed.
The rinse stops automatically. Your X8 is ready for use.
E The start screen shows the products you can prepare. Press
the ' T ' button to display more products.
Your X8 creates fine, creamy, feather-light milk foam with a perfect
consistency. The most important requirement for frothing milk is a
milk temperature of 4–8 °C. We would therefore recommend using
a milk cooler or a milk container.
T Connect the milk pipe to the dual spout.
T Connect the other end of the milk pipe to a milk container
or a milk cooler.
1 Preparing and using for the first time
button.
13