4 Permanent settings in programming mode
Setting the water
hardness
Milk system rinsing
26
T Press the
'Save'
'Saved'
appears briefly on the display.
'4/5'
T Press the
''
button to exit programming mode.
The harder the water is, the more frequently the X8 needs to be
descaled. It is therefore important to set the water hardness accu-
rately.
The water hardness was set when the machine was first used. You
can change this setting at any time.
The total water hardness can be adjusted on a continuous scale
between 1 °dH and 30 °dH.
T Press the
' Pc '
T Press the
' T '
button several times until
T Press the
'Water hardness'
'Water hardness'
T Press the
' < '
water hardness.
T Press the
'Save'
'Saved'
appears briefly on the display.
'4/5'
T Press the
''
button to exit programming mode.
In the programme item
the following settings:
U
'Manual': You are prompted to perform milk system rinsing
10 minutes after preparation of a speciality coffee with milk.
U
'Automatic': The milk system rinsing is automatically initiated
10 minutes after preparation of a speciality coffee with milk.
Example: Proceed as follows to set the milk system rinsing to be ini-
tiated automatically 10 minutes after the preparation.
T Press the
' Pc '
T Press the
' T '
button several times until
T Press the
'Rinse the milk system'
'Rinse the milk system'
T Press the
'Automatic'
button.
button.
button.
or
' > '
button to change the setting for the
button.
'4/5'
/
'Rinse the milk system'
button.
button.
button.
'4/5'
is displayed.
you can make
'4/5'
is displayed.