Adjusting The Product Settings - Jura X8 Instructions For Use Manual

4 Permanent settings in programming mode
Adjusting the product
settings
Product
'Ristretto',
'Espresso'
'Coffee',
'Special'
'Cappuccino',
'Caffè latte',
'Flat White'
'Latte macchiato'
'1 portion milk'
'Jug of coffee'
'Hot water',
'Hot water for
green tea'
22
In the programme item
settings for all speciality coffees and hot water. The following per-
manent settings can be made:
Coffee Amount
strength
10 levels Water: 15 ml – 80 ml
10 levels Water: 25 ml – 240 ml
10 levels Water: 25 ml – 240 ml
Milk foam: 0 sec. – 120 sec.
Milk: 0 sec. – 120 sec.
10 levels Water: 25 ml – 240 ml
Milk foam: 0 sec. – 120 sec.
Milk: 0 sec. – 120 sec.
Interval: 0 sec. – 60 sec.
– Milk foam: 0 sec. – 120 sec.
Milk: 0 sec. – 120 sec.
10 levels Water: 25 ml – 240 ml
Number of strokes (1–5; set
number is displayed during
preparation)
– Water: 25 ml – 450 ml
E When preparing double products, the amounts set for the
single product are doubled. The temperature of the single
product remains unchanged.
Permanent settings in programming mode always follow the same
model.
Example: Proceed as follows to change the coffee strength for one
coffee.
T Press the
T Press the
T Press the
'Expert mode'
'3/5' / 'Expert mode'
More settings
Temperature (normal, high),
position
Temperature (normal, high),
position
Milk and milk foam temperature,
Temperature (normal, high),
position
Milk and milk foam temperature,
Temperature (normal, high),
position
Milk and milk foam temperature,
position
Temperature (normal, high),
position
Temperature (low, normal, high),
position
' Pc ' button.
' T ' button several times until
'Expert mode' button.
you can make individual
'3/5' is displayed.