Jura X8 Instructions For Use Manual page 12

1 Preparing and using for the first time
First-time use with filter
cartridge activation
CAUTION
12
T Press the ' < '
setting, for example to '25 °dH'.
T Press the 'Save'
'Saved' appears briefly on the display.
'Filter operation'
E Now decide whether you want to operate your X8 with or
without a CLARIS Pro Smart filter cartridge.
Operation with filter cartridge: go straight to the next section.
Operation without filter cartridge: see Chapter 1 'Preparing and
using for the first time – First-time use without filter cartridge acti-
vation'.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Remove the water tank and rinse it with cold water.
T Open the filter holder.
T Insert the filter cartridge into the water tank, exerting slight
pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
'Change the filter'
'Filter is being
Rinsing of the filter stops automatically.
'System is filling', the system fills up with water.
'Empty drip tray'
T Empty the drip tray and coffee grounds container and put
them back into the machine.
'Machine is rinsing', the system is rinsed.
The rinse stops automatically. Your X8 is ready for use.
or ' > ' button to change the water hardness
button.
/ 'Saved'
rinsed', water flows directly into the drip tray.