Preparation; Espresso, Coffee And Other Speciality Coffees - Jura X8 Instructions For Use Manual

2 Preparation

Espresso, coffee and
other speciality coffees
Basic information about preparing drinks:
U
The display shows the products you can prepare. Press the
button to display more products.
U
During the grinding operation you can select the coffee
strength of single products by pressing the
tons.
U
During preparation you can change the preset amounts
(e.g. water and amount of milk foam) by pressing the
' > ' buttons.
U
You can stop the machine at any time while a speciality coffee
or hot water is being prepared. To do this, press the
button.
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 'Permanent settings in programming mode –
Adjusting the product settings').
Ristretto, espresso, coffee and special coffee are all prepared follow-
ing this model.
For a pot of coffee, you can choose the number of brewing opera-
tions (1–5 strokes) in programming mode.
Example: Proceed as follows to prepare one coffee.
Precondition: The start screen is displayed.
T Place a cup under the dual spout.
T Press the
'Coffee'
Preparation starts.
displayed. The preset amount of water for coffee flows into
the cup.
Preparation stops automatically. Your X8 is once more ready
for use.
button.
'Coffee' and the coffee strength are
2 Preparation
' T '
' < ' and ' > ' but-
' < ' and
'Cancel'
15