Inserting The Filter; Changing The Filter - Jura X8 Instructions For Use Manual

Inserting the filter

Changing the filter

Your X8 no longer has to be descaled if you are using the CLARIS Pro
Smart filter cartridge. If you did not insert the filter cartridge the first
time you used the machine, you can do this now as follows.
T Remove the water tank and rinse it with cold water.
T Open the filter holder.
T Insert the filter cartridge into the water tank, exerting slight
pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
'Saved' appears briefly on the display.
'Filter is being
Rinsing of the filter stops automatically.
'Empty drip tray'
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Your X8 is once more ready for use.
E If the filter is active, this is indicated by a blue filter symbol at
the bottom of the display.
E Once the filter cartridge stops working (depending on the
water hardness setting), the X8 will prompt you to change the
filter.
E CLARIS Pro Smart filter cartridges are available from special-
ised dealers.
Precondition: The filter symbol at the bottom of the display lights
up red.
T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Pro Smart
filter cartridge.
rinsed', water flows directly into the drip tray.
5 Maintenance
33