Setting The Clock; Setting The Disc; Reformat - Pioneer DVR-RT501-S Operating Instructions Manual

Various settings
02

Setting the clock

Your VCR/DVD is fitted with a 24 hour clock.
You must set the date and time for timer record-
ings.
Preparation:
• Turn ON the TV and select its AV channel (this may
be labelled EXT / AUX etc.).
• Select "CLOCK" from the "SYSTEM SETUP"
section of the SETUP MENU and press ENTER
(For the full procedure, see steps 1 to 3 in "Using
the SETUP MENU" on page 19).
SETUP MENU
TIMER REC SET
SYSTEM SETUP
CLOCK (DD/MM/YY)
AV SETUP
AUTO TIME
REC SETUP
CHANNEL SETUP
OTHER
SELECT
ENTER ENTER RETURN
Ex.: Setting the clock to "10:20" September, 27th, 2005.
1
Select the desired items using
month, year, hour and minute), then press ENTER.
01 /01/05 00:00
2
Press or to set the value of the selected item.
27/09/05 10:20 0
3
Repeat steps 1 and 2 to set the date, year and
present time, and press ENTER. The SETUP
MENU will close.
This completes clock time setting.
To set the AUTO TIME
1
Select "AUTO TIME" from "CLOCK".
2
Press ENTER, then press
or OFF.
NOTES:
• In case of a power failure, the clock will continue to
operate for another 30 minutes with quartzcontrolled
precision. To indicate that the power failure has lasted
for an excessive period of time "0:00" will appear on
the display. In this case readjust time and date.
• When the AUTO TIME is set to ON, the unit
automatically corrects the clock setting.
22
En
2H30301B_En_18_29
CLOCK
LANGUAGE
PARENTAL
01/01/05 00:00
CLOCK
ON
DISC SETUP
OTHER
SELECT
BACK SETUP END
or (date,
or to select ON
22

Setting the disc

You can format, protect, or finalise a disc.
Preparation:
• Turn ON the TV and select its AV channel (this may
be labelled EXT / AUX etc.).
• Select "DISC SETUP" from "SYSTEM SETUP". For
the procedure, see steps 1 to 3 in "Using the
SETUP MENU" on page 19.
SETUP MENU
TIMER REC SET
DISC SETUP
SYSTEM SETUP
REFORMAT AS DVD VIDEO
AV SETUP
REFORMAT AS DVD VR
NEW DISC FORMAT
REC SETUP
FINALISE
CHANNEL SETUP
PROTECT DISC (VR ONLY)
OTHER
UNDO FINALISE

REFORMAT

You can format a recorded DVD-RW.
Check the content of the disc before format. If you
format the disc, the recorded content of the disc will
be erased.
To format a DVD in the Video mode, select "REFOR-
MAT AS DVD VIDEO", and to format it in the VR
mode, select "REFORMAT AS DVD VR".
The screen below will appear.
REFORMAT
START
• When you select "START" and press ENTER,
format will start. The screen below will appear.
REFORMAT
• When format finished, "REFORMATTING COM-
PLETED PRESS ENTER" will appear.
Press ENTER, the normal TV screen will appear.
• When you select "CANCEL" and press ENTER, the
DISC SETUP screen will appear.
NOTES:
• You cannot reformat DVD-R.
• You cannot reformat a disc if the disc protection is "ON".
In such a case, be sure to cancel the disc protection
(see page 23) before format.
• During formatting, finalising and undo finalising, the
progress will be shown by "–" in the front display window.
8/4/05, 19:20
PROCEED
PROCEED
VR
PROCEED
OFF
PROCEED
CANCEL