Basic Connections; Playback Connection - Pioneer DVR-RT501-S Operating Instructions Manual

Before using your unit
01

Basic connections

Connect your VCR/DVD to your main aerial and TV set as shown in the illustration. When you have finished
making these connections, connect your VCR/DVD to the mains power supply (230V / 50Hz).
Before making or changing any rear panel connections, make sure that all components are switched off and
unplugged from the wall outlet.
TV
Aerial-Input
VCR/DVD
AC power cord 230V/50 Hz
Connecting this unit to your TV using the SCART connections
In addition to the coaxial cable connection, you should also connect the supplied SCART cable from the VCR/
DVD to your TV as shown. As well as transferring the high quality pictures and sound to your TV, the SCART
connection can automatically switch the TV to its AV channel for playback.
Some TVs may not allow automatic switching to the AV input channel. In this case you should manually select
the AV input setting on your TV's controls when playing through this unit.

Playback connection

The exact arrangement you use to interconnect various video and audio components to the VCR/DVD is
dependent on the model and features of each component. Check the Operation Manual provided with each
component for the location of SCART socket.
Connection to a Satellite Receiver
If a Satellite Receiver is used, we recommend the following configuration:
Satellite
Satellite Receiver
Antenna
To record from Satellite Receiver press INPUT SELECT on the remote control of the VCR/DVD. "A1"
16
will appear on the front display. Select the particular satellite channel on the Satellite Receiver.
En
2H30301B_En_12_17
To SCART socket
DECODER/EXTERNAL SCART Socket (AV2)
TV Scart socket (AV1)
Supplied SCART cable
Supplied Coaxial cable
VCR/DVD
SCART-cable (supplied)
16
RF-Input
(from house antenna)
RF-Output (to TV)
SCART-cable (not supplied)
8/4/05, 19:20
Aerial
TV