Tape Playback; Loading And Unloading A Cassette Tape - Pioneer DVR-RT501-S Operating Instructions Manual

Tape playback

04

Loading and unloading a cassette tape

VCR
Use only video cassette tapes marked
• HQ VHS is compatible with existing VHS equipment.
Loading
Push the center of the tape until it is automatically
inserted.
Automatic power ON
When you insert a cassette tape the VCR power will turn ON automatically.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Unloading
You can eject the video tape while the unit is turned off.
1
Press (EJECT) on the unit or the remote
control.
Automatic tape eject
This VCR will automatically rewind the tape when the tape has ended. And when the tape is rewound to its
beginning, the cassette tape will be ejected automatically.
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
Erase prevention tab
Tape speed and maximum recording time
Tape speed
E-240
Standard Play (SP) 4 hours
Long Play (LP) 8 hours
We recommend using E-180 video tapes or shorter.
46
En
2H30301B_En_46_49
Screwdriver
Video cassette tape
E-30
E-180 E-90 E-60
3 hours 1 1/2 hou. 1 hour 30 min.
6 hours 3 hours 2 hours 1 hour
46
.
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left.
An inverted cassette tape cannot be inserted.
Erase prevention tab
2
Remove the cassette tape.
To record again
Cover the hole with a piece of adhesive tape.
Adhesive
Tape
8/4/05, 19:23