Dubbing; Dubbing A Tape Onto A Disc - Pioneer DVR-RT501-S Operating Instructions Manual

Dubbing

07

Dubbing a tape onto a disc

VR mode Video mode DVD-R
VCR
You can record video or audio
on a video tape onto a disc.
NOTES:
• Dubbing cannot be accomplished
when
- a copy protected tape is used.
- a finalised disc is used.
- disc protection is set.
- disc has no recording space.
• Dubbing stops when
- the video tape is played back to
the end and stops.
- recording space becomes full.
- the picture noise continues for 1
minute.
• The videos recorded from TV
programs or movies can be used
only for your personal enjoyment
without permission of the copyright
holder.
78
En
2H30301B_En_78_81
Preparation:
• Turn ON the TV and select its AV channel (this may be labelled
EXT / AUX etc.).
• Load a source video tape and a disc for recording.
• Remove the erase protection tab of the source video tape to
prevent the data from accidentally being erased.
• Confirm the disc space before operation.
1
Press DVD/VCR to set this unit to DVD mode.
The DVD indicator will light.
2
Press REC MODE/SPEED and select the recording mode SP,
LP, EP or XP.
• The recording mode is indicated on both the TV screen and
the display window.
• For the details of the recording mode, see page 50.
3
Press DVD/VCR and set the unit to VCR mode.
NOTE:
Confirm that the VCR indicator lights.
4
Press DUBBING.
• The unit is changed to DVD mode automatically.
• The VCR is waiting for playback and the DVD is waiting for
recording. Then the following message will appear.
5
Press DUBBING, or
select "YES" and press ENTER.
Dubbing starts.
• To cancel dubbing, press
STOP, or select "NO" and
press ENTER.
In dubbing, VCR playback, DVD recording and "dub" (dubbing)
indicator appear on the display window.
Video playback
Press CLOCK/COUNTER to display the elapsed dubbing time in
the display window.
6
To stop dubbing, press STOP.
78
or to
CONFIRM DUBBING FROM VCR TO DVD
YES NO
SELECT DUBBING YES
ENTER ENTER STOP NO
DVD recording
8/4/05, 19:26