Pioneer DVR-RT501-S Operating Instructions Manual page 81

Dubbing
Playback unit connection.
The playback unit can be a camcorder or a video recorder. See each operation manual for each playback
operation. The copy protected video or DVD disc cannot be copied.
See "EXTERNAL AUDIO INPUT" on page 26 for how to switch the external audio input.
Dubbing with A/V-cable (or S-Video cable) (not supplied)
To playback unit
A/V-cable (not supplied)
AV3
Dubbing with SCART cable (not supplied)
To playback unit
TV-unit (not supplied)
2H30301B_En_78_81
Recording unit
S-Video cable (not supplied)
SCART cable
(not supplied)
Recording unit
SCART
cable
(supplied)
81
Press INPUT SELECT on the remote
control repeatedly until A3 appears on the
front display.
If the other VCR or camcorder is equipped
with S-Video output, a superior picture will
be achieved using an S-Video cable
connected to the S-Video-input (AV3) on
the front panel with S-Video cable. In this
case, you must select "S-VIDEO" mode in
AV3 INPUT-setting on page 25.
If you select "VIDEO", only the composite
video signal will be input. (S-Video input
signal will be cut.)
The S-Video input can be used only for
recording on the disc. (The S-Video input
cannot be used for recording on the video
tape.)
Press INPUT SELECT on the remote
control repeatedly until A2 appears on the
front display.
8/4/05, 19:26
07
81
En