Pioneer DVR-RT501-S Operating Instructions Manual page 53

Recording
DVD-Video VR mode
VCR
Auto Rewind feature
This VCR will automatically rewind the
tape when the tape has ended (except
during OTR and TIMER REC). It will
also eject the tape.
NOTES:
• If the disc space become full, the
recording is stopped and "RECORDING
INTERRUPTED" will appear on the
screen.
• In the event of a power failure
during DVD recording including
OTR and TIMER REC, the program
can not be recorded on the disc.
When the power resumes, after
theVCR/DVD is turned on, the set
checks the disc to repair the error
which is caused by a power failure.
This checking process may require
about 1 minute 30 seconds
according to disc condition. In this
process "SYSTEM ERROR
PLEASE WAIT DISC CHECKING"
will appear on the screen.
2H30301B_En_50_53
To stop recording
DVD-R
Press STOP to stop recording.
NOTE:
When recording onto a DVD, even if STOP is
pressed during recording, recording does not
stop instantly due to the concluding process
of recording. Recording may continue for as
long as 1 minute maximam. While this pro-
cess, "PROCESSING PLEASE WAIT" will
appear on the screen.
To stop recording temporarily
Press PAUSE/STILL to avoid recording
unwanted material.
"4" will appear on screen for about 4
seconds.
Press again to resume recording.
NOTES:
• In the recording onto a video tape, the pause function will be
released after 5 minutes to prevent damage the video tape. The
unit will change to the STOP mode.
• When recording onto a video tape, you can change a recording
channel in the recording pause mode. (You cannot change a
recording channel in the DVD recording pause mode.)
• Chapter marks are made when recording to a DVD in the VR
Mode.
53 8/4/05, 19:23
05
53
En