Removing And Replacing The Keypad Assembly - Motorola ROKR E2 Service Manual
Digital wireless telephone
Hide thumbs
Also See for ROKR E2:
- Instruction manual (108 pages) ,
- User manual (95 pages) ,
- Manual (48 pages)
Table of Contents
Advertisement
Disassembly
Removing and Replacing the Keypad Assembly
34
1.
Remove the SD card, battery cover, battery, SIM, side bands, rear housing,
and transceiver PC board assembly as described in the procedures.
2.
Beginning underneath the front housing, use the plastic disassembly tool to
push the keypad upward out of the front housing.
3.
Lift the keypad assembly away from the front housing as shown in Figure 16.
Keypad
Disassembly
tool
Figure 16. Removing the Keypad Assembly
4.
To replace, turn the front housing over so that the display lens is facing up.
March 27, 2006
E2
Front housing
Display module
051987o
6809497A99-O
Advertisement
Table of Contents
Troubleshooting
