Disassembly
Disassembly
G
G
Removing and Replacing the SD (Secure Digital) Card
24
This section describes how to disassemble a E2 telephone. Tools and equipment
used are listed in Table 1, preceding.
Many of the integrated devices used in this equipment are vulnerable to damage
from electrostatic discharge (ESD). Ensure adequate static protection is in place
when handling, shipping, and servicing the internal components of this equipment.
Avoid stressing the plastic in any way to avoid damage to either the plastic or
internal components.
1.
Ensure the phone is turned off.
2.
Open the memory card door to see if a memory card is installed.
Memory card
door
Figure 5. Opening the Memory Card Door
March 27, 2006
E2
051882o
6809497A99-O